Table of Contents
Advertisement
Setting up Measurement Conditions and Display
Saving/Recalling Instrument Setup State (Save/Recall Function)
Saving/Recalling instrument configuration states into/from the internal memory
Figure 4-5
corresponding to them.
Figure 4-5
CATALOG page (when saving instrument configurations into the internal
memory)
To save configuration states into the internal memory:
Step 1.
Press [Save/Recall].
Step 2.
Use the cursor keys to select the MEDIA field.
Step 3.
Press the INT softkey.
Step 4.
Use the cursor keys to select the No. field (0 through 9) for your desired
register.
Step 5.
Press the SAVE softkey to save configuration states into the internal memory.
If you have selected the No. field for a register that already contains
configuration states, new configuration states overwrite the existing ones.
To recall configuration states from the internal memory:
Step 1.
Press [Save/Recall].
Step 2.
Use the cursor keys to select the MEDIA field.
Step 3.
Press the INT softkey.
Step 4.
Use the cursor keys to select the No. field (0 through 9) for your desired
register.
Step 5.
Press the RECALL softkey to recall configurations from the internal memory.
82
shows the fields available on this page along with the softkeys
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Advertisement
Table of Contents
