Unpacking And Preparation; Contents Of This Chapter - Keysight E4981A User Manual

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
User Manual
1

Unpacking and Preparation

This chapter describes how to set up and start the Keysight E4981A
Capacitance Meter.

Contents of this Chapter

•
•
•
•
•
"Checking the Shipment" on page 12
After you receive the E4981A, check all the items in the packing
container.
"Environmental Requirements" on page 13
Describes the system requirements needed to install the E4981A and
how to secure space for heat radiation.
"How to Remove the Handle" on page 16
Shows how to attach and remove the handle.
"Preparations Before Use" on page 18
Shows how to check the power supply as well as check and connect
the power cable. This section also describes how to deal with a blown
fuse.
"Starting the E4981A" on page 20
Describes how to turn on/off the power switch and cut off the power
supply.