Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
User Manual
2
Overview
This chapter provides the basic procedures for operating the E4981A and
describes names and functions of the front panel, rear panel, and screen
display.
Product Introduction
The Keysight E4981A is a capacitance meter for ceramic capacitor production
tests. The E4981A is used for evaluating ceramic capacitance at frequencies
120 Hz, 1 kHz to 1 MHz and test signal levels (0.1 mV to 1 V).
The E4981A offers C-D measurement with a basic accuracy of ±0.07% (C),
±0.0005 (D) at all frequencies with seven-digit resolution (the dissipation factor
resolution is 1×10
With its built-in comparator, the E4981A can output comparison/decision
results for sorting components into a maximum of ten bins. Furthermore, by
using the handler interface and scanner interface, the E4981A can be easily
combined with a component handler, a scanner, and a system controller to
fully automate component testing, sorting, and quality-control data
processing.
The GPIB/LAN/USB interfaces are standard on the E4981A and enable
automatic testing.
–6
) in every range.