Changing The Beep Tone; Functional Description - Keysight E4981A User Manual

Setting up Measurement Conditions and Display

Changing the Beep Tone

Changing the Beep Tone

Functional description

The E4981A allows you to change the beep tone to one of five levels.
To change the beep tone:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the BEEPER TONE field.
Step 4. Change the beep tone by pressing the appropriate softkey:
Softkey
TONE 1
TONE 2
TONE 3
TONE 4
TONE 5
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
Selects tone 1.
Selects tone 2.
Selects tone 3.
Selects tone 4.
Selects tone 5.
69