Setting up Measurement Conditions and Display
Saving/Recalling Instrument Setup State (Save/Recall Function)
Memory status information
Functional description
Each register number is associated with one of the following memory status
values:
Status value
–1
0
1
2
The ninth instrument setting corresponds to Auto Recall. Auto recall is not
executed when power is ON, by pressing the [Preset] key.
Comment information
Functional description
You can view comments entered into the comment line (USER COMMENT field)
on the Measurement Conditions screen. For information on how to enter a
comment, see
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
The register contains non-E4981A configuration information.
The register contains no configurations.
The register does contain configurations.
The register contains any configuration that was saved under a
different firmware version or from another E4981A with a different
option(s) equipped.
1. This value is not applicable when the medium mode is INT (internal memory).
2. An "Incompatible state file" warning message is displayed. Status information may
fail to be correctly recalled.
"Inputting Comment Line" on page
2
53.
1
81