Executing Measurement
Starting (Triggering) Measurement
Setting the trigger mode
Step 1.
Press [Meas Setup].
Step 2.
Use the cursor keys to select the TRIG field.
Step 3.
Select the desired trigger mode by pressing the appropriate softkey
Softkey
INT
MAN
EXT
BUS
Perform successive measurements automatically
Select the internal trigger mode according to the procedure in
trigger mode" on page
repeated, triggered by the internal trigger signal.
Specifying measurement timing
Generating a trigger manually
Step 1.
Select the manual trigger mode according to the procedure in
trigger mode" on page
Step 2.
Press the [Display Format] key.
Step 3.
Press the [Trigger] key to make a single measurement.
116
Function
Puts the instrument into internal trigger (INT) mode.
Puts the instrument into manual trigger (MAN) mode.
Puts the instrument into external trigger (EXT) mode.
Puts the instrument into bus trigger (GPIB/USB/LAN) mode.
116. In this mode, measurements are automatically
116.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
"Setting the
"Setting the