Sbus<N>:Cxpi:source - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

:SBUS<n>:CXPI:SOURce
Command Syntax
:SBUS<n>:CXPI:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:CXPI:SOURce command selects the oscilloscope channel
connected to the CXPI signal line.
Query Syntax
:SBUS<n>:CXPI:SOURce?
The :SBUS<n>:CXPI:SOURce? query returns the selected oscilloscope channel
source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also •
•
•
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1428)
":SBUS<n>:CXPI:BAUDrate"
":SBUS<n>:CXPI:PARity"
":SBUS<n>:CXPI:TOLerance"
":SBUS<n>:CXPI:TRIGger"
on page 809
on page 810
on page 812
on page 813
29
:SBUS<n> Commands
811