Power:transient:next - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

26
:POWer Commands

:POWer:TRANsient:NEXT

Command Syntax
:POWer:TRANsient:NEXT
The :POWer:TRANsient:NEXT command goes to the next step of the transient
analysis.
This command is equivalent to pressing the Next softkey on the oscilloscope front
panel when prompted during the analysis.
See Also •
•
•
•
712
(see page 1428)
":POWer:TRANsient:APPLy"
":POWer:TRANsient:EXIT"
":POWer:TRANsient:IINitial"
":POWer:TRANsient:INEW"
on page 708
on page 709
on page 710
on page 711
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide