Power:transient:inew - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

:POWer:TRANsient:INEW

Command Syntax
:POWer:TRANsient:INEW <value>[suffix]
<value> ::= New current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:TRANsient:INEW command to specify the new load current value. The
new load current will be used as a reference and to trigger the oscilloscope.
Query Syntax
:POWer:TRANsient:INEW?
The :POWer:TRANsient:INEW query returns the new load current value.
Return Format
<value><NL>
<value> ::= New current value in NR3 format
See Also •
•
•
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1428)
":POWer:TRANsient:APPLy"
":POWer:TRANsient:EXIT"
":POWer:TRANsient:IINitial"
":POWer:TRANsient:NEXT"
on page 708
on page 709
on page 710
on page 712
26
:POWer Commands
711