Sbus<N>:Cxpi:tolerance - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

29
:SBUS<n> Commands
:SBUS<n>:CXPI:TOLerance
Command Syntax
:SBUS<n>:CXPI:TOLerance <percent>
<percent> ::= from 1-30, in NR1 format.
The :SBUS<n>:CXPI:TOLerance command specifies the tolerance as a percentage
of the Tbit width.
Query Syntax
:SBUS<n>:CXPI:TOLerance?
The :SBUS<n>:CXPI:TOLerance? query returns the tolerance setting.
Return Format
<percent><NL>
<percent> ::= from 1-30, in NR1 format.
See Also •
•
•
•
812
(see page 1428)
":SBUS<n>:CXPI:BAUDrate"
":SBUS<n>:CXPI:PARity"
":SBUS<n>:CXPI:SOURce"
":SBUS<n>:CXPI:TRIGger"
on page 809
on page 810
on page 811
on page 813
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide