Save:filename - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

:SAVE:FILename

Command Syntax
:SAVE:FILename <base_name>
<base_name> ::= quoted ASCII string
The :SAVE:FILename command specifies the source for any SAVE operations.
This command specifies a file's base name only, without path information or an extension.
NOTE
Query Syntax
:SAVE:FILename?
The :SAVE:FILename? query returns the current SAVE filename.
Return Format
<base_name><NL>
<base_name> ::= quoted ASCII string
See Also •
•
•
•
•
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1428)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE[:SETup[:STARt]]"
":SAVE:WAVeform[:STARt]"
":SAVE:PWD" on page 739
":RECall:FILename" on page 717
on page 725
on page 730
on page 746
on page 747
28
:SAVE Commands
729