Search:peak:excursion - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

30
:SEARch Commands

:SEARch:PEAK:EXCursion

Command Syntax
:SEARch:PEAK:EXCursion <delta_level>
<delta_level> ::= required change in level to be recognized as a peak,
The :SEARch:PEAK:EXCursion command specifies the change in level that must
occur (in other words, hysteresis) to be recognized as a peak.
The threshold level units are specified by the :FUNCtion<m>[:FFT]:VTYPe
command.
Query Syntax
:SEARch:PEAK:EXCursion?
The :SEARch:PEAK:EXCursion? query returns the specified excursion delta level
value.
Return Format
<delta_level><NL>
<delta_level> ::= in NR3 format.
See Also •
•
•
•
1010
(see page 1428)
in NR3 format.
":FUNCtion<m>[:FFT]:VTYPe"
":SEARch:PEAK:NPEaks"
":SEARch:PEAK:SOURce"
":SEARch:PEAK:THReshold"
on page 408
on page 1011
on page 1012
on page 1013
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide