Save:mask[:Start] - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

28
:SAVE Commands

:SAVE:MASK[:STARt]

Command Syntax
:SAVE:MASK[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-3; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :SAVE:MASK[:STARt] command saves a mask.
If a file extension is provided as part of a specified <file_name>, it must be ".msk".
NOTE
See Also •
•
•
•
•
736
(see page 1428)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 729
":SAVE:PWD" on page 739
":RECall:MASK[:STARt]"
":MTESt:DATA" on page 594
on page 725
on page 719
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide