Measure:show - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

22
:MEASure Commands

:MEASure:SHOW

Command Syntax
:MEASure:SHOW <on_off>
<on_off> ::= {{0 | OFF} | {1 | ON}}
The :MEASure:SHOW command enables markers for tracking measurements on
the display.
Query Syntax
:MEASure:SHOW?
The :MEASure:SHOW? query returns the current state of the markers.
This can return OFF when :MARKer:MODE selects a mode other than
MEASurement.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
528
(see page 1428)
"Introduction to :MEASure Commands"
":MARKer:MODE" on page 455
on page 488
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide