Search:serial:iic:qualifier - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

30
:SEARch Commands

:SEARch:SERial:IIC:QUALifier

Command Syntax
:SEARch:SERial:IIC:QUALifier <value>
<value> ::= {EQUal | NOTequal | LESSthan | GREaterthan}
The :SEARch:SERial:IIC:QUALifier command specifies the data value qualifier used
when searching for IIC EEPROM data read events.
Query Syntax
:SEARch:SERial:IIC:QUALifier?
The :SEARch:SERial:IIC:QUALifier? query returns the current data value qualifier
setting.
Return Format
<value><NL>
<value> ::= {EQU | NOT | LESS | GRE}
See Also •
•
•
1058
(see page 1428)
Chapter 30, ":SEARch Commands," starting on page 993
":SEARch:SERial:IIC:MODE"
":SEARch:SERial:IIC:PATTern:DATA"
on page 1053
on page 1056
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide