Sbus<N>:Sent:signal<S>:Length - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

29
:SBUS<n> Commands
:SBUS<n>:SENT:SIGNal<s>:LENGth
Command Syntax
:SBUS<n>:SENT:SIGNal<s>:LENGth <length>
<s> ::= 1-6, in NR1 format.
<length> ::= from 1-24, in NR1 format.
The :SBUS<n>:SENT:SIGNal<s>:LENGth command specifies the bit length of the
signal being defined.
Fast Signal definition examples:
Query Syntax
:SBUS<n>:SENT:SIGNal<s>:LENGth?
The :SBUS<n>:SENT:SIGNal<s>:LENGth? query returns the signal bit length
setting.
Return Format
<length><NL>
<length> ::= from 1-24, in NR1 format.
See Also •
•
•
•
•
•
•
•
•
910
(see page 1428)
":SBUS<n>:SENT:CLOCk"
":SBUS<n>:SENT:CRC"
":SBUS<n>:SENT:DISPlay"
":SBUS<n>:SENT:FORMat"
":SBUS<n>:SENT:IDLE"
":SBUS<n>:SENT:LENGth"
":SBUS<n>:SENT:PPULse"
":SBUS<n>:SENT:SIGNal<s>:DISPlay"
":SBUS<n>:SENT:SIGNal<s>:MULTiplier"
on page 900
on page 901
on page 902
on page 904
on page 906
on page 907
on page 908
on page 909
on page 912
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide