Measure:ppulses - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

22
:MEASure Commands

:MEASure:PPULses

Command Syntax
:MEASure:PPULses [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:PPULses command installs a rising pulse count measurement on
screen. If the optional source parameter is not specified, the current source is
measured.
This command is not available if the source is FFT (Fast Fourier Transform).
NOTE
Query Syntax
:MEASure:PPULses? [<source>]
The :MEASure:PPULses? query measures and returns the on-screen rising pulse
count.
Return Format
<value><NL>
<value> ::= the rising pulse count in NR3 format
See Also •
•
520
(see page 1428)
"Introduction to :MEASure Commands"
":MEASure:SOURce" on page 529
on page 488
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide