Search:serial:flexray:cycle - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

:SEARch:SERial:FLEXray:CYCLe

Command Syntax
:SEARch:SERial:FLEXray:CYCLe <cycle>
<cycle> ::= {ALL | <cycle #>}
<cycle #> ::= integer from 0-63
The :SEARch:SERial:FLEXray:CYCLe command specifies the cycle value to find
when searching for FlexRay frames.
A cycle value of -1 is the same as ALL.
Query Syntax
:SEARch:SERial:FLEXray:CYCLe?
The :SEARch:SERial:FLEXray:CYCLe? query returns the current cycle value setting.
Return Format
<cycle><NL>
<cycle> ::= {ALL | <cycle #>}
<cycle #> ::= integer from 0-63
See Also •
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1428)
Chapter 30, ":SEARch Commands," starting on page 993
":SEARch:SERial:FLEXray:MODE" on page 1045
30
:SEARch Commands
1041