Trigger:pattern:format - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

33
:TRIGger Commands

:TRIGger:PATTern:FORMat

Command Syntax
:TRIGger:PATTern:FORMat <base>
<base> ::= {ASCii | HEX}
The :TRIGger:PATTern:FORMat command sets the entry (and query) number base
used by the :TRIGger:PATTern command. The default <base> is ASCii.
Query Syntax
:TRIGger:PATTern:FORMat?
The :TRIGger:PATTern:FORMat? query returns the currently set number base for
pattern trigger patterns.
Return Format
<base><NL>
<base> ::= {ASC | HEX}
See Also •
•
1194
(see page 1428)
"Introduction to :TRIGger Commands"
":TRIGger:PATTern" on page 1192
on page 1139
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide