Save:compliance:usb[:Start] - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

28
:SAVE Commands

:SAVE:COMPliance:USB[:STARt]

Command Syntax
:SAVE:COMPliance:USB[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:COMPliance:USB[:STARt] command saves USB 2.0 signal quality test
results to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".html".
NOTE
See Also •
•
•
•
728
(see page 1428)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 729
":SAVE:PWD" on page 739
Chapter 11, ":COMPliance Commands," starting on page 325
on page 725
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide