Sbus<N>:Iic:asize - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

:SBUS<n>:IIC:ASIZe
Command Syntax
:SBUS<n>:IIC:ASIZe <size>
<size> ::= {BIT7 | BIT8}
The :SBUS<n>:IIC:ASIZe command determines whether the Read/Write bit is
included as the LSB in the display of the IIC address field of the decode bus.
Query Syntax
:SBUS<n>:IIC:ASIZe?
The :SBUS<n>:IIC:ASIZe? query returns the current IIC address width setting.
Return Format
<mode><NL>
<mode> ::= {BIT7 | BIT8}
Errors •
See Also •
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1428)
"-241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:IIC Commands"
on page 1387
on page 755
on page 862
29
:SBUS<n> Commands
863