Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual page 360

15
:DISPlay Commands
Table 98 :DISPlay Commands Summary (continued)
Command
n/a
:DISPlay:INTensity:WA
Veform <value> (see
page 370)
:DISPlay:LABel {{0 |
OFF} | {1 | ON}} (see
page 371)
:DISPlay:LABList
<binary block> (see
page 372)
:DISPlay:MENU <menu>
page 373)
(see
:DISPlay:SIDebar
<sidebar> (see
page 374)
:DISPlay:PERSistence
page
<value> (see
:DISPlay:VECTors {{0
| OFF} | {1 | ON}}
page 376)
(see
Introduction to The DISPlay subsystem is used to control the display storage and retrieval of
:DISPlay waveform data, labels, and text. This subsystem allows the following actions:
Commands
• Clear the waveform area on the display.
• Turn vectors on or off.
• Set waveform persistence.
• Specify labels.
• Save and Recall display data.
Reporting the Setup
Use :DISPlay? to query the setup information for the DISPlay subsystem.
360
Query
:DISPlay:DATA?
[<format>][,][<palett
page
e>] (see
:DISPlay:INTensity:WA
Veform? (see
:DISPlay:LABel? (see
page 371)
:DISPlay:LABList?
page 372)
(see
n/a
n/a
:DISPlay:PERSistence?
375) page 375)
(see
:DISPlay:VECTors?
page 376)
(see
Options and Query Returns
<format> ::= {BMP | BMP8bit |
PNG}
369)
<palette> ::= {COLor | GRAYscale}
<display data> ::= data in IEEE
488.2 # format
<value> ::= an integer from 0 to
page 370)
100 in NR1 format.
{0 | 1}
<binary block> ::= an ordered
list of up to 75 labels, each 10
characters maximum, separated by
newline characters
<menu> ::= {MASK | MEASure |
SEGMented | LISTer | POWer}
<sidebar> ::= {SUMMary | CURSors
| MEASurements | DVM | NAVigate |
CONTrols | EVENts | COUNter}
<value> ::= {MINimum | INFinite |
<time>}
<time> ::= seconds in in NR3
format from 100E-3 to 60E0
{0 | 1}
OFF or 0 can only be selected
with the 1 GHz or 1.5 GHz
bandwidth models
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide