Sbus<N>:Uart:parity - Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual

:SBUS<n>:UART:PARity
Command Syntax
:SBUS<n>:UART:PARity <parity>
<parity> ::= {EVEN | ODD | NONE}
The :SBUS<n>:UART:PARity command selects the parity to be used with each
message "byte" for the serial decoder and/or trigger when in UART mode.
Query Syntax
:SBUS<n>:UART:PARity?
The :SBUS<n>:UART:PARity? query returns the current UART parity setting.
Return Format
<parity><NL>
<parity> ::= {EVEN | ODD | NONE}
See Also •
•
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1428)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 1148
":SBUS<n>:UART:TRIGger:TYPE"
on page 1139
on page 966
29
:SBUS<n> Commands
957