Danfoss VLT AutomationDrive FC 300 Design Manual page 227

FC 300 Design Guide
7-** Controls
"
Par. Parameter description
No.
#
7-0* Speed PID Ctrl.
7-00 Speed PID Feedback Source
7-02 Speed PID Proportional Gain
7-03 Speed PID Integral Time
7-04 Speed PID Differentiation Time
7-05 Speed PID Diff. Gain Limit
7-06 Speed PID Lowpass Filter Time
7-2* Process Ctrl. Feedb
7-20 Process CL Feedback 1 Resource
7-22 Process CL Feedback 2 Resource
7-3* Process PID Ctrl.
7-30 Process PID Normal/ Inverse Control
7-31 Process PID Anti Windup
7-32 Process PID Start Speed
7-33 Process PID Proportional Gain
7-34 Process PID Integral Time
7-35 Process PID Differentiation Time
7-36 Process PID Diff. Gain Limit
7-38 Process PID Feed Forward Factor
7-39 On Reference Bandwidth
default setting ( )
*
How to Programme
Default value
ExpressionLimit
ExpressionLimit
[0] No function
[0] No function
[0] Normal
10000.00 s
display text [ ] value for use in communication via serial communication port
MG.33.B4.02 - VLT is a registered Danfoss trademark
4-set-up
null All set-ups
0.015 N/A All set-ups
All set-ups
All set-ups
5.0 N/A All set-ups
10.0 ms All set-ups
All set-ups
All set-ups
All set-ups
[1] On All set-ups
0 RPM All set-ups
0.01 N/A All set-ups
All set-ups
0.00 s All set-ups
5.0 N/A All set-ups
0 % All set-ups
5 % All set-ups
FC 302 Change Con-
only during ver-
operation sion
index
FALSE -
TRUE -3
TRUE -4
TRUE -4
TRUE -1
TRUE -4
TRUE -
TRUE -
TRUE -
TRUE -
TRUE 67
TRUE -2
TRUE -2
TRUE -2
TRUE -1
TRUE 0
TRUE 0
Type
Uint8
Uint16
Uint32
Uint16
Uint16
Uint16
Uint8
Uint8
Uint8
Uint8
Uint16
Uint16
Uint32
Uint16
Uint16
Uint16
Uint8
227