Danfoss VLT AutomationDrive FC 300 Design Manual page 193

FC 300 Design Guide
Function:
Par. 10-32 is used for EDS file creation.
10-33 Store Always
Option:
*
Off
On
Function:
This parameter selects if data parameters received
on DeviceNet should be stored in EEPROM as default.
10-39 Devicenet F Parameters
Array [1000]
Option:
No LCP access
0 - 0
Function:
This parameter is used to configure the drive
via Devicenet and build the EDS-file.
default setting ( )
*
How to Programme
[0]
[1]
display text [ ] value for use in communication via serial communication port
MG.33.B4.02 - VLT is a registered Danfoss trademark
*
0
193