Introduction To Fc 300; Software Version; Ce Conformity And Labelling - Danfoss VLT AutomationDrive FC 300 Design Manual

FC 300 Design Guide

Introduction to FC 300

CE Conformity and Labelling

"
What is CE Conformity and Labelling?
The purpose of CE labelling is to avoid technical trade obstacles within EFTA and the EU. The
EU has introduced the CE label as a simple way of showing whether a product complies with
the relevant EU directives. The CE label says nothing about the specifications or quality of the
product. Frequency converters are regulated by three EU directives:
The machinery directive (98/37/EEC)
All machines with critical moving parts are covered by the machinery directive of January 1, 1995. Since
a frequency converter is largely electrical, it does not fall under the machinery directive. However, if a
frequency converter is supplied for use in a machine, we provide information on safety aspects relating
to the frequency converter. We do this by means of a manufacturer's declaration.
The low-voltage directive (73/23/EEC)
FC 300
Design Guide
Software version: 2.5x
This Design Guide can be used for all FC 300 frequency
converters with software version 2.5x.
The software version number can be seen from parameter
15-43.
MG.33.B4.02 - VLT is a registered Danfoss trademark
15