Danfoss VLT AutomationDrive FC 300 Design Manual page 224

FC 300 Design Guide
4-** Limits / Warnings
"
Par. Parameter description
No.
#
4-1* Motor Limits
4-10 Motor Speed Direction
4-11 Motor Speed Low Limit [RPM]
4-13 Motor Speed High Limit [RPM]
4-16 Torque Limit Motor Mode
4-17 Torque Limit Generator Mode
4-18 Current Limit
4-19 Max Output Frequency
4-5* Adj. Warnings
4-50 Warning Current Low
4-51 Warning Current High
4-52 Warning Speed Low
4-53 Warning Speed High
4-54 Warning Reference Low
4-55 Warning Reference High
4-56 Warning Feedback Low
4-57 Warning Feedback High
4-58 Missing Motor Phase Function
4-6* Speed Bypass
4-60 Bypass Speed From [RPM]
4-62 Bypass Speed To [RPM]
default setting ( )
*
224
How to Programme
Default value
[0] Clockwise
ExpressionLimit
ExpressionLimit
ImaxVLT (P1637)
outputSpeedHighLimit
-999999.999 N/A
999999.999 N/A
-999999.999
ReferenceFeedbackUnit
999999.999 Reference-
FeedbackUnit
display text [ ] value for use in communication via serial communication port
MG.33.B4.02 - VLT is a registered Danfoss trademark
4-set-up
All set-ups
0 RPM All set-ups
All set-ups
160.0 % All set-ups
160.0 % All set-ups
All set-ups
132.0 Hz All set-ups
0.00 A All set-ups
All set-ups
0 RPM All set-ups
(P413) All set-ups
All set-ups
All set-ups
All set-ups
All set-ups
[1] On All set-ups
0 RPM All set-ups
0 RPM All set-ups
FC 302 Change Conver-
only during sion
operation index
FALSE -
TRUE 67
TRUE 67
TRUE -1
TRUE -1
TRUE -1
FALSE -1
TRUE -2
TRUE -2
TRUE 67
TRUE 67
TRUE -3
TRUE -3
TRUE -3
TRUE -3
TRUE -
TRUE 67
TRUE 67
Type
Uint8
Uint16
Uint16
Uint16
Uint16
Uint32
Uint16
Uint32
Uint32
Uint16
Uint16
Int32
Int32
Int32
Int32
Uint8
Uint16
Uint16