Danfoss VLT AutomationDrive FC 300 Design Manual page 140

FC 300 Design Guide
the motor size. The latter selection can be used
to program several drives with the same function
without disturbing motor data which are already set.
Par. 0-50 cannot be adjusted while motor is running.
0-51 Set-up Copy
Option:
*
No copy
Copy to set-up 1
Copy to set-up 2
Copy to set-up 3
Copy to set-up 4
Copy to all
Function:
Select Copy to set-up 1 [1] to copy all parameters in
the current edit set-up (set in par. 0-11) to set-up
1. Make the same choice in the other parameters.
Select Copy to all [9] to make all parameters in all
set-ups to the parameters in the current edit set-up.
0-6* Password
"
This group contains the parameters that control
the password functionality.
0-60 Main Menu Password
Range:
0 - 999
Function:
Defines the password used for accessing the
Main Menu. If par. 0-61 is set to Full access
[0], this parameter is ignored.
0-61 Access to Main Menu w/o Password
Option:
*
Full access
Read only
No access
Function:
Select Full access [0] to disable the password
in par. 0-60. Select Read only [1] to block
unauthorized editing of Main Menu parameters.
Select No access [2] to block unauthorised viewing
and editing of Main Menu parameters.
If [0] Full access is selected then par. 0-66 is ignored.
0-65 Quick Menu Password
Range:
0 - 999
default setting ( )
*
140
How to Programme
[0]
[1]
[2]
[3]
[4]
[9]
[0]
[1]
[2]
display text [ ] value for use in communication via serial communication port
MG.33.B4.02 - VLT is a registered Danfoss trademark
Function:
Defines the password be used to access the
Quick Menu. If par. 0-66 is set to Full access
[0], this parameter is ignored.
0-66 Access to Quick Menu w/o Password
Option:
*
Full access
Read only
No access
Function:
Select Full access [0] to disable the password in par.
0-65. Select Read only [1] to block unauthorised
editing of Quick Menu parameters. Select No
access [2] to block unauthorised viewing and
editing of Quick Menu parameters.
This parameter is ignored if par. 0-61 is
set to [0] Full access.
*
100
*
200
[0]
[1]
[2]