Commissioning The Hmi Device - Siemens LOGO! Series Manual

Overview

1.13 Commissioning the HMI device

Protective foil
Name
Protective foil 4"
Protective foil 4"
widescreen
Protective foil 6"
Protective foil 10"
Protective foil 15"
Service packages
Purpose
Set with 20 plastic clamps for KP300 Basic Mono PN, KP400 Basic color
PN and KTP400 Basic color PN
Set with 20 aluminum mounting clamps for Basic Panels from 4"
Set of 10 power supply terminals
1.13 Commissioning the HMI device
This section contains an overview of the tasks required for commissioning the HMI device.
1.
2.
3.
4.
5.
6.
7.
8.
9.
24
Purpose
Protective foil set for KTP400 Basic mono PN
Protective foil set for KTP400 Basic color PN
Protective foil set for KTP600 Basic
Protective foil set for KTP1000 Basic
Protective foil set for TP1500 Basic color PN
Description
Familiarize yourself with the safety
instructions.
Prepare the HMI device for mounting.
Install the HMI device.
Connect the equipotential bonding.
Connect the power supply.
Connect a configuration PC.
Enable sharing for data channel on the HMI
device.
Transfer a project.
After transferring the project, disconnect the
HMI device from the configuration PC and
connect the HMI device to the PLC.
Order no.
6AV6 671-2EC00-0AX0
6AV2124-6DJ00-0AX0
6AV6 671-2XC00-0AX0
6AV6 671-3DC00-0AX5
6AV6 574-1AD00-4EX0
Order no.
6AV6671-8KX00-0AX2
6AV6671-8XK00-0AX0
6AV6671-8XA00-0AX0
Section
Safety instructions (Page 25)
Preparations (Page 29)
Mounting the HMI device (Page 34)
Connecting the equipotential bonding circuit
(Page 38)
Connecting the power supply (Page 39)
Connecting the configuration PC (Page 42)
Enabling a data channel (Page 76)
Starting manual transfer (Page 91)
Connecting the PLC (Page 45)
Operating Instructions, 04/2012, A5E02421799-03
Basic Panels