Siemens LOGO! Series Manual page 141

Network inputs/outputs (available only in 0BA7 if configured from LOGO!Soft Comfort)
You can configure the following network inputs/outputs only from LOGO!Soft Comfort. If the
circuit program in LOGO! contains a network digital/analog I/O, you can not edit any of the
rest of the circuit program except for the Par parameter. To edit the rest of the program, you
must upload the program to LOGO!Soft Comfort and then edit from LOGO!Soft Comfort.
1) Network digital inputs
Network digital inputs are identified with an NI. There are 64 digital network digital inputs NI1
to NI64 available for configuration in the circuit program from LOGO!Soft Comfort.
2) Network analog inputs
Network analog inputs are identified with an NAI. There are 32 network analog inputs NAI1
to NAI32 available for configuration in the circuit program from LOGO!Soft Comfort.
3) Network digital outputs
Network digital outputs are identified with an NQ. There are 64 network digital outputs NQ1
to NQ64 available for configuration in the circuit program from LOGO!Soft Comfort.
4) Network analog outputs
Network analog outputs are identified with an NAQ. There are 16 network analog outputs
NAQ1 to NAQ16 available for configuration in the circuit program from LOGO!Soft Comfort.
LOGO!
Manual, 04/2011, A5E03556174-01
LOGO! functions
4.1 Constants and connectors - Co
141