Siemens LOGO! Series Manual page 238

LOGO! functions
4.4 Special functions list - SF
Input P configuration
From the input P, you configure the following characteristics of the message text:
● Priority
● Acknowledgement
● Message destination
● Tick type, and tick setting for each line
To configure the priority and the acknowledgment (programming mode):
1. Increase the priority to 1: Cursor on '0' +
2. Change to 'Ack': Press
3. Enable 'Ack': Press
LOGO! shows:
To configure the message destination and tick type (programming mode):
1. From the Priority and Acknowledgement screen form, press
2. Press
3. Press
4. From the Message Destination screen form, press
238
or
Destination screen form.
to position the cursor on the "BM" line.
or to toggle through the three choices for message destination: BM, TD, or BM
& TD.
form.
to access the Message
to access the Tick Type screen
Manual, 04/2011, A5E03556174-01
LOGO!