Siemens LOGO! Series Manual page 336

Technical data
A.8 Technical data: LOGO! 12/24... LOGO! DM8 12/24R
Short circuit-proof cos 0.5 to
0.7
Parallel output circuits for
power increase
Protection of output relay
(if desired)
Switching rate
Mechanical
Ohmic load/lamp load
Inductive load
Notice: For fluorescent lamps with capacitors, the technical data of fluorescent lamp ballasts
must also be considered. If the maximum allowed surge current is exceeded, fluorescent
lamps must be switched with appropriate contactor relays.
The data was determined with the following devices:
Siemens fluorescent tubes 58W VVG 5LZ 583 3-1 uncompensated.
Siemens fluorescent tubes 58W VVG 5LZ 583 3-1 parallel compensated with 7μF.
Siemens fluorescent tubes 58W VVG 5LZ 501 1-1N with ballast.
336
LOGO! 12/24RC
LOGO! 12/24RCo
LOGO! 12/24RCE
Power protection B16, 900A
Not permitted
max. 16 A, characteristic B16
10 Hz
2 Hz
0.5 Hz
LOGO! DM8 12/24R
Power protection B16, 900A
Not permitted
max. 16 A, characteristic
B16
10 Hz
2 Hz
0.5 Hz
Manual, 04/2011, A5E03556174-01
LOGO!