Siemens LOGO! Series Manual page 242

LOGO! functions
4.4 Special functions list - SF
Setting the Par parameter
View in programming mode:
Press
Press
position to the other, press
The list of available characters is the same as for the circuit program name. The character
set is found in topic Circuit program input (Page 86). When you enter message text from the
LOGO! Basic, you can only enter characters from the ISO8859-1 character set. To enter text
from another language, you must enter the text in LOGO!Soft Comfort.
Note that the number of characters per line of message text can be greater than the number
of character positions on the LOGO! onboard display.
Press OK to confirm your changes, and press ESC to exit the editing mode.
242
to select a line for the message text.
and to select the letter to be displayed in the text. To move the cursor from one
and .
Manual, 04/2011, A5E03556174-01
LOGO!