Siemens LOGO! Series Manual page 323

Protection of output relay (if
desired)
Switching rate
Mechanical
Ohmic load/lamp load
Inductive load
Notice: For fluorescent lamps with capacitors, the technical data of fluorescent lamp ballasts
must also be considered. If the maximum allowed surge current is exceeded, fluorescent
lamps must be switched with appropriate contactor relays.
The data was determined with the following devices:
Siemens fluorescent tubes 58W VVG 5LZ 583 3-1 uncompensated.
Siemens fluorescent tubes 58W VVG 5LZ 583 3-1 parallel compensated with 7μF.
Siemens fluorescent tubes 58W VVG 5LZ 501 1-1N with ballast.
LOGO!
Manual, 04/2011, A5E03556174-01
LOGO! 230RC
LOGO! 230RCo
max. 16 A, characteristic B16
10 Hz
2 Hz
0.5 Hz
Technical data
A.2 Technical data: LOGO! 230...
LOGO! 230RCE
max. 16 A, characteristic B16
10 Hz
2 Hz
0.5 Hz
323