Accessories - Siemens LOGO! Series Manual

1.12

Accessories

Accessories are not included in the product package of the HMI device, but can ordered on
the Internet under Industry Mall (http://mall.automation.siemens.com).
This section contains the number of accessories available at the time of publication of the
operating instructions.
Converters, adapters and connectors
Name
RS 422 to RS 232
converter
PC/PPI cable
90 degree elbow
adapter
USB/PPI cable
PROFIBUS connector
PROFINET RJ45
connector "IE FC RJ45
Plug 2x2"
1
Clamping frame
Name
Clamping frame
for 10"/12" Touch
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
Purpose
Connection of third-party controllers to Basic
Panels DP
Converts RS 422/RS 485 signals to RS 232
signals. Is required for updating the operating
system with reset to factory settings
be used for the transfer.
For RS422/RS485 interface, cable outlet to rear 6AV6671-8XD00-0AX0
Converts RS 422/RS 485 signals to USB
signals. Is required for updating the operating
system with reset to factory settings. Can also
be used for the transfer.
Recommended PROFIBUS connector with
straight cable outlet
Required for connection of Basic Panels PN to
PROFINET
If the connection is lost during the operating system update, set a lower bit rate. If you use a higher
bit rate, you must use the PC/PPI cable release 3 or higher. The release code is printed on the
cable ("E version 3," for example, corresponds to release 3).
Purpose
For reinforcement of the mounting cutout for
KTP1000 Basic when material is not thick
enough
1.12 Accessories
Order no.
6AV6671-8XE00-0AX0
6ES7 901-3CB30-0XA0
. Can also
1
6ES7 901-3DB30-0XA0
6GK1500-0FC10
6GK1901-1BB10-2AA0
Order no.
6AV6 671-8XS00-0AX0
Overview
23