Siemens LOGO! Series Manual page 433

The following figure shows the assignment using the "F5" function key as an example.
①
②
③
On the KP300 Basic, you navigate either in the menu or operate the current project.
Operating Menus
Proceed as follows:
1. Use the cursor keys to navigate within the menu of the KP300 Basic.
2. Press <ENTER> to execute a menu command.
3. If the menu level contains an text box, use the function keys to enter the appropriate
4. If the menu level contains a list:
5. To enter a value in the menu:
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
Number assignment; automatically active when you enter numerical values
Function key assignment; active by default
If you change to editing mode in the Control Panel or project with <ENTER>, the function
assignment is disabled. Instead, the numerical and/or alphanumerical assignment is active. A
message indicating that the function keys are disabled appears at the same time.
Letter assignment; automatically active when you enter alphanumerical values. The numerical
assignment is available as well.
When you enter hexadecimal values, the alphanumerical assignment from "A" to "F" and the
numerical assignment are active.
The selection moves to the corresponding menu entry.
The next menu level is displayed.
value.
– Press <ENTER> to activate the operation of the list.
– Use the cursor keys to move between list entries.
– Press <ENTER> to execute a list entry.
– Press <ENTER> to apply a value.
– Press <ESC> to discard a value or return to a higher-level menu.
Operating the device
4.2 Operating KP300 Basic
61