Selecting The Parameters - Siemens LOGO! Series Manual

7.1.2

Selecting the parameters

To select a parameter:
1. On the parameter assignment menu, select
2. Confirm with OK.
3. Now, select the desired parameter: Press
4. Select the parameter you want to edit, and press OK.
LOGO!
Manual, 04/2011, A5E03556174-01
'Set Param': Press or
LOGO! shows the first parameter. If no parameter can be set, you can press ESC to
return to the parameter assignment menu.
7.1 Selecting parameter assignment mode
or
Configuring LOGO!
291