Siemens LOGO! Series Manual page 236

LOGO! functions
4.4 Special functions list - SF
Example
This is how two message texts could be shown:
Message Ticking
You can configure message text lines to tick or not tick. Two types of message ticking exist:
● Character by character
● Line by line
Messages that tick character by character scroll off the characters of the message line one
character at a time to the left with the additional characters scrolling in one at a time from the
right. The time interval for the tick is specified by the TickTime message text setting.
Messages that tick line by line by line scroll one half of the message off the display to the left
with the second half of the message scrolling in from the right. The time interval for the tick is
ten times the TickTime parameter. The two halves of the message simply alternate on the
LOGO! onboard display or LOGO! TD.
236
Manual, 04/2011, A5E03556174-01
LOGO!