Modular Logo! Setup; Maximum Logo! Network Setup (0Ba7 Only) - Siemens LOGO! Series Manual

LOGO! installation and wiring

2.1 Modular LOGO! setup

2.1 Modular LOGO! setup
2.1.1

Maximum LOGO! network setup (0BA7 only)

Maximum LOGO! 0BA7 network setup
LOGO! 0BA7 supports SIMATIC S7 communication via 10/100 Mbit/s TCP/IP Ethernet.
A LOGO! 0BA7 device can support a maximum of 8+1 network connections as described
below:
● 8: A maximum of eight TCP/IP-based S7 communication connections with the following
● 1: A maximum of one TCP/IP Ethernet connection between a LOGO! Base Module and a
Note
You can only construct a LOGO! 0BA7 network topology using LOGO!Soft Comfort V7.0.
32
devices:
– Additional LOGO! 0BA7 devices
– SIMATIC S7 PLCs with Ethernet functionality
– A maximum of one SIMATIC HMI that supports Ethernet communication with
networked S7 PLCs
PC with LOGO!Soft Comfort V7.0 installed
Manual, 04/2011, A5E03556174-01
LOGO!