Siemens LOGO! Series Manual page 289

LOGO! shows the main menu of the programming mode:
LOGO! 0BA6 main menu
LOGO! 0BA7 main menu
● Menu command ②
For information on the various parameters, refer to the topics "Parameters (Page 290)",
"Selecting the parameters (Page 291)", and "Modifying parameters (Page 292)".
● Menu command ③
For information on the various settings, refer to the topic "Setting the default values for
LOGO! (Page 294)".
● Menu command ④
This menu command only allows you to read the name of your circuit program. It is not
possible to modify this name in parameter assignment mode (Page 90).
● Menu command ⑤
For information on the various settings, refer to the topic Configuring network settings
(Page 119) and the topic Changing LOGO! to normal/slave mode (Page 123).
● Menu command ⑥
For information on the various settings, refer to the topic Diagnosing errors from LOGO!
(Page 128)
LOGO!
Manual, 04/2011, A5E03556174-01
7.1 Selecting parameter assignment mode
Configuring LOGO!
289