Logo! Functions - Siemens LOGO! Series Manual

LOGO! functions

LOGO! provides you with various elements in programming mode, which are organized in
the following lists:
● ↓Co: Connector list (Connector) (Page 138)
● ↓GF: List of the basic functions AND, OR, ... (Page 142)
● ↓SF: List of the special functions (Page 156)
● ↓BN: List of reusable blocks configured in the circuit program
LOGO! 0BA7 can additionally provide you with the following elements in programming mode,
if you have previously configured them in your circuit program using LOGO!Soft Comfort:
● ↓UDF: List of user-defined function blocks configured in the circuit program
● L: A Data Log function block configured in the circuit program
List contents
All lists show the elements available in LOGO!. Usually, this includes
functions, and special functions. The ↓BN and ↓UDF lists show all the blocks that you have
created in LOGO!.
If not all is shown
LOGO! does
● No further blocks may be added.
● A specific block's memory space requirement (Page 130) would exceed the space
● You have not previously configured them (network digital and analog inputs/outputs, UDF
LOGO!
Manual, 04/2011, A5E03556174-01
not
show all elements if:
This is either an indication of insufficient memory space or that the maximum number of
blocks has been reached.
available in LOGO!
blocks, and the Data Log block) in the circuit program in LOGO!Soft Comfort and
downloaded the program to LOGO!.
4
all
connectors, basic
137