Configuring the HMI device
5.1
Configuring devices with graphical Control Panel
5.1.1
Opening the Control Panel
With the exception of the KP300 Basic mono PN, all Basic Panels have a graphic Control
Panel.
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
Open the Control Panel by pressing
the "Control Panel" button of the
Loader.
Configure your HMI device in the
Control Panel. You can make the
following settings:
Communication settings
•
Settings for operation
•
Password protection
•
Transfer settings
•
Screen saver
•
Acoustic signals
•
The "MPI / Profibus Settings" is only
available on Basic Panels DP.
The "Profinet" is only available on
Basic Panels PN.
The "Sound Settings" symbol is only
available on devices with sound
reproduction.
5
67