Os Update - Basic Panel Dp; Overview - Siemens LOGO! Series Manual

Restoring the data of the HMI device
Proceed as follows:
1. Select the "Restore" command from the "Online > HMI device maintenance" menu.
2. Enter the name of the backup file under "Save as".
3. Click "Start Restore".
This starts the restoration. This operation takes some time, depending on the connection
selected.
6.6

OS update - Basic Panel DP

6.6.1

Overview

Updating the operating system
A compatibility conflict may occur when transferring a project to the HMI device. This is
caused by different versions of the configuration software used and the HMI device image
available on the HMI device. If there are different versions, the transfer is aborted. A
message indicating a compatibility conflict is displayed on the configuring PC.
There are two ways to match the versions:
● Update the HMI device image if the project was created with the most recent version of
● Transfer a matching version of the HMI device image if you do not want to adapt the
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
Information about the selected backup file is displayed under "Content".
the configuration software.
project for the HMI device to the most recent version of the configuration software for the
project.
NOTICE
Data loss
All data on the HMI device, such as the project and licenses, will be deleted when you
update the operating system.
Note
Calibrating the touch screen
After the update, you may have to recalibrate the touch screen.
Commissioning a project
6.6 OS update - Basic Panel DP
101