Siemens LOGO! Series Manual page 28

Getting started with LOGO!
ID for Korea
Risk of death, personal injury or property damage can occur if you do not follow safety
precautions for hazardous locations.
In potentially explosive atmospheres, do not disconnect connectors when the system is in
RUN. Always switch off the power supply to LOGO! and its components before you
disconnect any connectors or components.
Substitution of components can impair suitability for Class I, Division 2 locations.
Combinations of equipment are subject to investigation by the local authority having
jurisdiction at the time of the installation.
Recycling and Disposal
LOGO! units can be fully recycled, due to their low-pollutant equipment. Contact a certified
electronic waste disposal center for environmentally acceptable recycling and disposal of
your old devices.
28
Our products carrying the label shown at the side are compliant with Korean
standards.
WARNING
Manual, 04/2011, A5E03556174-01
LOGO!