Siemens LOGO! Series Manual page 96

Programming LOGO!
3.7 Writing and starting the circuit program
The main menu of the LOGO! TD (version ES7):
LOGO! changes to STOP mode.
Note
Whenever the LOGO! TD is shut down, the password is reset. The next time you start it and
access this password-protected function (RUN to STOP), you will be prompted for password
entry on the LOGO! TD.
If the password entry screen form (as shown in Step 3) has stayed for more than one minute
since you pressed any key on the LOGO! TD, the LOGO! TD automatically returns you to
one of the following displays:
• Display of the current time-of-day and date, if the LOGO! Base Module that connects to
• Display of active messages , if the LOGO! Base Module that connects to the LOGO! TD
• Display of the values of the digital inputs, if the LOGO! Base Module that connects to the
The LOGO! TD can also change LOGO! from STOP to RUN mode, but no password is
required in this case.
96
the LOGO! TD is a LOGO! Basic without active messages
is a LOGO! Basic with active messages
LOGO! TD is a LOGO! Pure
Manual, 04/2011, A5E03556174-01
LOGO!