1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Figure 8.32 Data Frame Format of the CAN Bus
Trigger Type
Click or tap the drop-down button of Type to select "CAN".
Figure 8.33 CAN Trigger Setting Menu
After a trigger type is selected, the current trigger setting information (including
trigger type, trigger source, and trigger level) is displayed in the trigger information
label at the top of the screen, as shown in the figure below. The information will
change based on the trigger settings.
Source Selection
Click or tap the drop-down button of Source to select CH1-CH4. For details, refer to
Trigger Source
descriptions in
information label at the top of the screen.
www.calcert.com
15
10
20
5
25
0
30
The selected trigger source is indicated in the trigger
Triggering the Oscilloscope
sales@calcert.com
DHO1000 User Guide