Setting Target Setpoint; Operation In The Operation Display - YOKOGAWA UT Advanced UT32A User Manual

6.2 Setting Target Setpoint

Operation in the Operation Display

Operation
IM 05P01D31-01EN
1
.
Bring the SP Display into view.
2
.
Press the SET/ENTER key to move to the setting mode
(the setpoint blinks).
3
.
Press the Left arrow key to move one digit to the left.
(Press the Right arrow key to move one digit to the right.)
4
.
Press the Up or Down arrow key to change a setpoint.
Press the Up arrow key when 9 is displayed to move
one digit to the left.
Press the Down arrow key when 0 is displayed to
move one digit to the right.
5
.
Press the SET/ENTER key to register the setpoint.
Control with the new setpoint.
6
6-9