Table of Contents
Advertisement
Communications
Configuration
Thermo Fisher Scientific
addr dns
This command reports the TCP/IP address for the domain name server.
Send:
addr dns
Receive:
addr dns 192.168.1.1
set addr dns address
This command sets the dns address, where address consists of four numbers
ranging from 0-255 inclusive, separated by ".".
Send:
set addr dns 192.168.1.1
Receive:
set addr dns 192.168.1.1 ok
addr gw
This command reports the default TCP/IP gateway address.
Send:
addr gw
Receive:
addr gw 192.168.1.1
set addr gw address
This command sets the default gateway address, where address consists of
four numbers ranging from 0-255 inclusive, separated by ".".
Note This command cannot be used when DHCP is on. Refer to the
DHCP command that follows for additional information.
Send:
set addr gw 192.168.1.1
Receive:
set addr gw 192.168.1.1 ok
addr ip
This command reports the IP address of the analyzer.
Send:
addr ip
Receive:
addr ip 192.168.1.15
set addr ip address
This command sets the analyzer's IP address, where address consists of four
numbers ranging from 0-255 inclusive, separated by ".".
Note This command cannot be used when DHCP is on. Refer to the
DHCP command that follows for additional information.
Send:
set addr ip 192.168.1.15
Receive:
set addr ip 192.168.1.15 ok
C-Link Protocol Commands
Communications Configuration
▲
▲
Model 42i Instruction Manual
B-43
Advertisement
Chapters
Table of Contents
Troubleshooting
