Thermo Scientific 42i Instruction Manual page 274

C-Link Protocol Commands
Measurements
Measurements
B-10 Model 42i Instruction Manual
Command Description
span Sets zero/span valves to span mode
span cal reset Reports/sets span cal reset on/off
span dev Reports/sets span deviation (maximum span check offset)
span dur Reports/sets how long span gas is sampled by the instrument
span gas Sets zero/span valves to span gas mode
sr Reports last short record stored
srec Reports maximum number of short records
srec format Reports/sets output format for short records (ASCII or binary)
srec layout Reports current layout of short record data
srec mem size Reports maximum number of short records
srec per Reports/sets short record logging period
stream per Reports/sets current set time interval for streaming data
stream time Reports/sets a time stamp to streaming data or not
temp comp Reports/sets temperature compensation on or off
time Reports/sets current time (24-hour time)
tz Reports/sets the timezone string for the network time
protocol server
up Simulates pressing up pushbutton
version Reports version of all the firmware components
zero Sets zero/span valves to zero mode
zero cal reset Reports/sets zero cal reset on/off
zero dev Reports/sets zero deviation (maximum zero check offset)
zero dur Reports/sets how long zero gas is ampled by the instrument
zero gas Sets zero/span valves to zero gas mode
zs avg time Reports/sets zero/span averaging time
zs period Reports/sets zero/span period
avg time
high avg time
low avg time
These commands report the averaging time in seconds when operating in
single range, or averaging time used with the high and low ranges when
operating in dual or auto range mode. The example below shows that the
averaging time is 300 seconds, according to Table B–2.
Thermo Fisher Scientific
Page
B-37
B-30
B-30
B-30
B-37
B-20
B-21
B-22
B-23
B-23
B-24
B-26
B-26
B-39
B-42
B-49
B-33
B-18
B-37
B-30
B-30
B-30
B-37
B-31
B-31