Data Bits; Parity; Stop Bits - Thermo Scientific 42i Instruction Manual

Operation
Instrument Controls Menu
RS-232/RS-485 Selection
3-36 Model 42i Instruction Manual
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings > Data Bits.

DATA BITS:

Parity

The Parity screen is used to select the parity bit for the serial port to None
(default), Even, or Odd.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings > Parity.
PARITY:

Stop Bits

The Stop Bits screen is used to set the number of stop bits for the serial
port to 1 (default) or 2.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings > Stop Bits.
STOP BITS:
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
CURRENTLY:
SET TO:
 CHANGE VALUE
 SAVE VALUE
RANGE AVG DIAGS ALARM
CURRENTLY:
SET TO:

CHANGE VALUE

SAVE VALUE
RANGE AVG DIAGS ALARM
CURRENTLY:
SET TO:
 CHANGE VALUE
 SAVE VALUE
RANGE AVG DIAGS ALARM
8
7 ?
NONE
ODD ?
1
2 ?
Thermo Fisher Scientific